FIRMWARE V2.0 | Release Date 11/19/2024
FIRMWARE V1.03 | Release Date 10/11/2024
A series of tutorials introducing the EAGLE SDI e-Viewfinder and its accessories, as well as how to rig the EAGLE on your camera.
101 e-Viewfinder Introduction
102 How To Rig on RED V-Raptor
103 How To Rig on RED KOMODO
104 How To Rig on SONY CineAltaB
105 How To Rig on SONY FX6
106 How To Rig on CANON C300
107 How To Rig on MAVO Edge 6K
Including the overview, how to rig, get started, user interface, menu, and safety notes of the EAGLE SDI e-Viewfinder.
The EAGLE SDI e-Viewfinder supports 3G/1.5G SDI but does not support 12G SDI. If the camera outputs 12G SDI, please set it to 3G SDI via the camera settings.
3G: 1080P@47.95p/50p/59.94p/60p
1.5G: 1080P@23.98p/24p/25p/29.97p/30p/23.98psf/24psf/25psf/29.97psf/50i/59.94i/60i
The resolution is 1920×1080 (RGBx3).
The panel supports 8-bit depth and 16 million colors. However, internal processing is conducted at 10-bit depth.
The diopter range is -6D to +2D, accommodating myopia up to 600 degrees and hyperopia up to 200 degrees.
The EAGLE SDI e-Viewfinder supports recording Run/Stop trigger functionality.
It can be triggered via the RS port on the SDI e-viewfinder cord, connected to the Fischer RS port on the camera body. This feature is compatible with cameras that have an Fischer RS port, such as ARRI cameras, RED V-RAPTOR XL, SONY VENICE, and Kinefinity cameras.
For cameras without an RS port, such as RED KOMODO/V-RAPTOR, recording can be triggered using an additional Kit like the Tilta RED KOMODO Camera Cage.
The EAGLE SDI e-Viewfinder does not support the import of 3D LUTs. Most cameras can set the LUT for SDI monitoring separately within the camera.
No, the USB Type-C port is used only for firmware upgrades.
Each EAGLE SDI e-Viewfinder is precisely color-calibrated in production. Under normal circumstances, further calibration is not necessary. If needed, factory calibration is available.
The EAGLE SDI e-Viewfinder does not have a built-in proximity sensor. However, it features an automatic screen-off function to protect the OLED screen. It is recommended to manually turn off the viewfinder when not in use (EAGLE supports quick start-up).
Support for SDI Metadata is expected to be available through a firmware update within the year.
Support for vector scope is expected to be available through a firmware update within the year.
