The EAGLE HDMI e-Viewfinder supports the following video signal inputs:
1920×1080 @23.98p/24p/25p/29.97p/30p/47.95p/50p/59.94p/60p
1920×1080 @23.98psf/24psf/25psf/29.97psf/50i/59.94i/60i
The resolution is 1920×1080 (RGBx3).
The panel supports 8-bit depth and 16 million colors. However, internal processing is conducted at 10-bit depth.
The diopter range is -6D to +2D, accommodating myopia up to 600 degrees and hyperopia up to 200 degrees.
The EAGLE HDMI e-viewfinder does not support recording triggers but does support metadata, which can display the camera's recording status.
The EAGLE HDMI electronic viewfinder is compatible with most monitors on the market. Monitors that have been tested and confirmed for compatibility include Vaxis Atom A5, Shimbol, and Bestview R7S III-V.
The EAGLE HDMI e-Viewfinder does not support the import of 3D LUTs. Most cameras can set the LUT for HDMI monitoring separately within the camera.
No. The EAGLE HDMI e-viewfinder's USB-C ports do not support video input. USB-C 1 is for PD 5V power input and USB-C 2 is for firmware updates.
Each EAGLE HDMI e-Viewfinder is precisely color-calibrated in production. Under normal circumstances, further calibration is not necessary. If needed, factory calibration is available.
The EAGLE HDMI e-Viewfinder does not have a built-in proximity sensor. However, it features an automatic screen-off function to protect the OLED screen. It is recommended to manually turn off the viewfinder when not in use (EAGLE supports quick start-up).
The EAGLE HDMI e-viewfinder currently supports metadata, including timecode, audio, and camera recording signals.
This feature is expected to be supported through a firmware update later this year.
If the problem resolves after rebooting the EVF, you can check the 【Display Off】setting in the menu and change the default setting from 【60 minutes】 to 【Never】. If modifying the default settings as described above does not resolve the frequent black screen issue, please contact support@kinefinity.com for further ssistance.
The EAGLE SDI e-Viewfinder supports 3G/1.5G SDI but does not support 12G SDI. If the camera outputs 12G SDI, please set it to 3G SDI via the camera settings.
3G: 1080P@47.95p/50p/59.94p/60p
1.5G: 1080P@23.98p/24p/25p/29.97p/30p/23.98psf/24psf/25psf/29.97psf/50i/59.94i/60i
The resolution is 1920×1080 (RGBx3).
The panel supports 8-bit depth and 16 million colors. However, internal processing is conducted at 10-bit depth.
The diopter range is -6D to +2D, accommodating myopia up to 600 degrees and hyperopia up to 200 degrees.
The EAGLE SDI e-Viewfinder supports recording Run/Stop trigger functionality.
It can be triggered via the RS port on the SDI e-viewfinder cord, connected to the Fischer RS port on the camera body. This feature is compatible with cameras that have an Fischer RS port, such as ARRI cameras, RED V-RAPTOR XL, SONY VENICE, and Kinefinity cameras.
For cameras without an RS port, such as RED KOMODO/V-RAPTOR, recording can be triggered using an additional Kit like the Tilta RED KOMODO Camera Cage.
The EAGLE SDI e-Viewfinder does not support the import of 3D LUTs. Most cameras can set the LUT for SDI monitoring separately within the camera.
No, the USB Type-C port is used only for firmware upgrades.
Each EAGLE SDI e-Viewfinder is precisely color-calibrated in production. Under normal circumstances, further calibration is not necessary. If needed, factory calibration is available.
The EAGLE SDI e-Viewfinder does not have a built-in proximity sensor. However, it features an automatic screen-off function to protect the OLED screen. It is recommended to manually turn off the viewfinder when not in use (EAGLE supports quick start-up).
The EAGLE HDMI e-viewfinder supports metadata after firmware 2.0, including timecode, audio, and camera recording signals.
Support for vector scope is expected to be available through a firmware update within the year.
If the problem resolves after rebooting the EVF, you can check the 【Display Off】setting in the menu and change the default setting from 【60 minutes】 to 【Never】. If modifying the default settings as described above does not resolve the frequent black screen issue, please contact support@kinefinity.com for further ssistance.
